| 1. |
Weigh Bridge (at the factory gate) |
| 2. |
Pucca Platform with cover for seed cotton storage. |
| 3. |
Auto Conveying System (Feeding of Kapas to Gin and from Gin
to Pala house (for lint)) |
| 4. |
Double roller / Saw Gin incorporating or without Pre-cleaner. |
| 5. |
Pre-cleaner, if the gin does not incorporate the same
( 1 Pre-cleaner for 24 double roller machine). |
| 6. |
Auto-feeder machine |
| 7. |
Lint cleaner, i.e., post ginning machine ( preferably with wooden
spikes for processing long and extra long staple cotton only. |
| 8. |
Humidification equipment / Bahnson fan in the gin house and pala
house. |
| 9. |
(i) Bailing press box suitable to prepare banded bales (full pressed)
of following nominal dimension (in conformity with the recently
amended BIS specification IS:12171:99)
Length
(in mm) |
Width
(in mm) |
Height
(in mm) |
| 1060 |
530
or |
780 |
| 1400 |
530
or |
700 |
| 1240 |
480 |
480 |
|
|
| |
| (ii) |
A unit replacing bale pressing machine or installing bale pressing
machine for the first time will be required to instal only single-
stage double box automatic revolving bale pressing machine.
However, a unit with existing 2 stage manual bale pressing
machine will not be compelled to replace it while going for other
modernisation as per the TUFS.
|
| Depth of the Press box: |
| (i) |
Minimum 18 feet and maximum 28 feet for 2 stage manual bale
pressing machine.
|
| (ii) |
Minimum 8 feet and maximum 12 feet for single stage double
box automatic revolving bale pressing machine.
|
|
Sr.
No. |
Type of unit |
Criteria to be followed while undertaking modernisation / setting up new unit in respect of depth of press box |
| (A) |
In existing ginning & pressing units or pressing units;
| (a) |
Existing press box of less than 18 feet and unit wanting to go for composite status with modernisation. |
| (b) |
Unit wants to change press box irrespective of its height. |
|
Interalia, new press box of minimum 18 feet is a must for 2 stage manual bale pressing machine.
|
(B)
(C) |
Existing ginning units going for composite status with modernisation
New composite units. |
Single stage double box automatic revolving bale press machine with press box height ranging from 8 feet to 12 feet. |
|
| 10. |
Fire fighting equipments. |
