ANNEX-F-1

LIST OF PROCESSING MACHINERY ELIGIBLE UNDER
TUF SCHEME FOR PROCESS HOUSE FOR YARN/FABRIC/
GARMENT/MADE-UPS (OTHER THAN WOOL &
POLYESTER/WOOL BLENDS & KNITS)


a. ESSENTIAL b. PROCESSING MACHINES
I. EFFLUENT TREATMENT
PLANT
 

Effluent treatment plant with primary, secondary and / or tertiary treatment facilities. (for units linked to common effluent treatment plant, effluent treatment plant with primary treatment system)

II.

QUALITY CONTROL
  EQUIPMENTS

  1)

PH meter

  2)

Wash fastness tester

  3)

Perspiration fastness
tester

  4)

Rubbing fastness tester

  5)

Computer colour
matching.

  6)

Electronic balance

  7)

Hot air oven

  8)

Grey scales

  9)

Crease recovery tester

  10)

Wrinkle recovery tester

I.WET PROCESSING
  MACHINES


1)

Yarn mercerising machine with caustic recovery / reuse system.

2)

Cabinet type hank yarn dyeing machine.

3)

Package dyeing machine (for yarn).

4)

Indigo dyeing range (sheet or rope form)   with   or   without sizing plant (only for denim manufacturing units.

5)

Fabric singeing cum desizing machine.

6)

Pressure Kier with automatic liquor circulation with or without auto piler.

7) J.Box
8)

Automatic open-width continuous scouring and bleaching range with microprocessor attachments and automatic chemical dosing.

9) Vaporloc machine
10)

Rotary drum washer (HT/H2 or ordinary type)

11)

Automatic open-width continuous dyeing range with microprocesor attachments and automatic colour / chemical dosing.

12)

Soft flow dyeing machine.

13)

Jet dyeing machine (Low liquor ratio of 1:3.5 to 7)

14)

Fully automatic jigger/Jumbo jigger (JT-10 or JT-15 type) with or without microprocessor controls.

15)

Float dryer with padding mangle.

16)

Hydro extractor based on centrifugal or vacuum system.

17) Ink jet printing machine.
18)

Automatic flat-bed screen printing machine.

19)

Rotary printing machine with or without automatic colour feeding system.

20)

Roller steamer

21)

Loop ager/steam ager/flash ager/star ager/pressure ager

22)

Multi chamber washing range with arrangement for reduced water consumption/water re -use system.

23)

Industrial garment washing/ drying machine.

24)

Tumble dryer.

25)

Fabric Mercerising machine with caustic recovery/re-use system

26)

Pad steam range

27)

Continuous print washer.

II.WET FINISHING
    MACHINES


1)

Multi chamber stenter (minimum 3 chambers with arrangement of oil/gas heating system) or multi-cylinder drying range.

2)

Radio frequency / infra red radiant gas fired/micro wave /loop/relax dryers.

3)

Sueding / Peach finishing machine

4)

Continuous weight reduction machine through micro wave technique (for Polyester goods only)

5)

Combisoft machine for softenin -g drying and stone wash effect

6) Form finisher

III.DRY PROCESSING /
    FINISHING MACHINES


1) Yarn singeing machine.
2)

Fabric singeing machine with LPG system with arrangement for singeing face and back in one pass.

3) Shearing/Cropping machine
4)

Thermosoling range (for synthetics)

5)

Transfer printing machine (for synthetics)

6)

Curing machine / Polymerising machine

7) Raising machine
8)

Coating / Laminating / Embossing machine.

9)

Compressive shrinking range (Zero-Zero type)

10) Dry-to-dry cleaning machine
11)

Airo machine ( for durable mechani -cal finishes )

12) Decastising machine
13)

Calendering machine (5 or 7 bowls)

14)

3 bowl shaped configuration calendar (for different types of surface effects).

IV.UTILITIES AND OTHERS

1)

Oil/gas fired boiler

2)

Thermopac / other high temperature heating system

3)

Automatic colour weighing and dispensing system

4)

Computer controlled fabric inspec -tion machine / fault analyser and report generator

5)

Rotary screen making equip -ments

6)

Light fastness tester

7)

Fabric strength tester

8)

BOD incubator

9)

COD digestion meter

10)

Soft package winders for yarn dyeing

11)

Cone to hank winding machine



c.   Any other machinery considered appropriate by the Technical
  Advisory-cum-Monitoring Committee (TAMC).